After air condense system, there are still lots of impurities in
it, like water, particles, suspensions and oil, which will do harm
to equipment and products.
When condensed air goes through the filter, impurities can be
absorbed and intercepted.
|Product technical parameters
Diameters of filters are from 108mm to 3000mm. According to the
length of diameter, filters can be divided into large filter and
small filter. One with less-than-1000mm diameter is called small
filter. Otherwise, it is called large filter.
working scope: Filter (ash)WaterOilDeodorant
1. 3um --- used in architect and cleansing, civil engineering and
machinery, metal product, steel, pressure molding, road engineering
2. 3um~99.9%-- pneumatic tools, general factories, control valve,
3. 0.01um pressure point, 0.1ppm equipment, electrostatic painting,
precision industry, drying of precision parts, electronic industry
4. 0.01um 2℃ 0.1ppm 99.5% food industry, exportation, medical
industry, blend, dry package respiration
|Installation and maintenance
1, the core component of the precision filter is the filter of the
filter, the filter is easy to damage the parts, need special
2, the precision filter for a long time to work, will cut a certain
amount of impurities, this will work when the rate decreased, so it
must be cleaned regularly, but also to clean the filter.
3, in the cleaning process to pay special attention to the cleaning
of the filter filter, do not deform or damage, otherwise it will
lead to a reduction of filter precision, not to the production
4, if the filter is found to be deformed or damaged, must be
5, some precision filter, can not be used repeatedly, such as bag
filter, polypropylene filter, etc..
Order shall be determined by the following parameters: diameter;
work pressure; (3) material; (4) flange standard; dielectric; the
operating pressure; to give you provide suitable products.