The advent of electric mowers has been a great help to mankind .
The lawn mower is a tool for mowing
grass and vegetation. It is composed of cutter disk, engine ,
walking mechanism , blade and handrail and control part. The cutter
disc is mounted on the travelling wheel , the cutter disc is
equipped with the engine, and the output shaft of the engine is
equipped with the blade . The blade takes advantage of the high -
speed rotation of the engine to improve the speed , save working
time and reduce a lot of human r esources.
Attars needing attention :
1 . Remove some debris in the mower area, such as the use of branch
charged mower gravel, other small objects and obstacles protruding
from the ground .
2. Place the charging center on a flat lawn terrain to ensure that
the bottom end of the charging center points counter-clockwise and
that the machine returns clockwise along the boundary line .
3. Arrange the boundary line from the charging center port ,
through the charging center floor , along the edge of the mowing
4 . open the mower, set the date and time, then press start to
start work .
1 . the slope is less than 30 degrees .
2 . security protection: when 6 kinds of fault operations occur,
the machine will stop working automatically . All the stops are
blades that stop spinning first , then stop moving. .
3 . Waterproof : All hulls are waterproof materials . There is no
difference between the signals designed by the inner blocks, so the
rain cannot flow inside the machine and disturb the function .
4 . Automatic shelter rain function: There is a rain sensor
built-in machine , when it detects rain, a few seconds later, the
machine can automatically restore the collection station, will not
go out to work until the next appointment or manual operation .
5 . AUTOMATIC OBSTACLE REDUCTION : A machine built-in with an
infrared detection system will automatically slow down walking
speed when there is an obstacle in front of it , right ? Protect
the machine from violent conflict .
6 . Auto-rechargeable batteries: When the mower completes the whole
job or the power is flat , the machine will automatically return to
the charging station .
7 . job appointment : Robot Mower, reduce labor , so that you have
more time .
8 . the tool can be changed and adjusted freely: there is a
rotating cover on the top cover to adjust the height of mowing .
9 . All machines pass through a comprehensive set of quality
control systems before leaving the factory : including circuit
boards , movement speed, noise detection, installation detection,
simulated lawn detection, vibration detection , rain detection, etc
. Just passed all the tests .