Aluminium Profile Conference Room Movable Partition Walls
Acoustic Operable Walls / Movable Partition Systems offer a unique
facility for utilising available space in the most practical
They allow a large space to be converted into smaller, separate
areas, which can be converted back to a large space with the
minimum of effort. Handled well and serviced regularly, they will
give many years of trouble free service.
Operable Wall can source, install and maintain a wide range of
Operable Walls , Moveable Partitions, Sliding Door Systems and Room
Dividers from the top manufacturers and extremely competitive
All installations include initial requirement assessment, on-site
training in use and care as well as optional maintenance servicing
Due to the movable partition walls flexibility and cost
effectiveness, it allows large rooms to be conveniently sub-divided
to maximize space utilization.
Operable wall material is customed built to suit the specified
requirement. Movable partition system can be made from aluminium,
gypsum, MDF, melamine-faced particleboard, plasterboard, plastic,
PVC, softwood, stainless steel or wood veneer.
To create a better sound insulation folding partition wall door, we
put high density fiberglass inside the partition frame, Sourcing
from imported world famous fiberglass brand Owens Corning which is
the best sound insulation cotton manufacturer.
|Panel Suspension||Top hanging system without the need for a floor track.|
|Panel Width||Each panel 600mm-1200mm.|
|Track||Aluminum Or Steel Track|
|Roller on panel||Single or Double Roller|
|Panel Frames||Heavy-duty steel-gusseted aluminum inner frames reinforced with
|Top and bottom seals||Top and bottom pressure retractable seals ensure effortless moved
|Module||700mm - 1200mm maximum.|
|Panel stacking||Numerous panel stacking options for complete flexibility.|
|Panel Surface||MDF,Plywood, woven fabric, Leather,Natural wood veneer,
Melamine,Wood moldings, etc.|
|Finishes||Satin anodized or polyester powder coating to all exposed aluminium
components available in a wide range of colour as standard.|
Rubber sealing materials plays an important role in modern sound
insulation technology, especially in doors, windows, cars, etc.
Our sealing rubber materials made by high quality EPDM rubber, foam
Have outstanding temperature resistance, optimum hardness and
mechanical strength for long lasting sealing results, Ozone
resistance, resistance to chemical corrosion properties.
Track: The tracks are made from extruded 6063 - T5 anodized
aluminium. The track housing shall utilize grooves and interlocking
steel pins for positive alignment of adjacent track sections, and
shall be reinforced overhead by drop rod brackets. Aluminum track
housing shall include an integral nut slot to accept a hardened
square nut for attaching each drop rod bracket to the top of the
Panels:The Panels will be made from 12mm MDF boards and shall be
100mm thick and 1230mm maximum width, made to the appropriate
acoustic rating and structural backing and mounted in full
perimeter extruded aluminium frames with interlocking corner
construction .The panel faces shall be finished with selected
Panel Surface Finish:The panel surface will be as per the clients
requirement finished either in Sliwal factory – China or by others
. The normal finish such as:laminate,veneer,melamine,fabric etc.
Panel faces are suspended from a steel frame with just 2 points of
contact. The edges of panel faces are slotted into aluminium
This method of cladding the steel frame allows the panel faces to
be acoustically separated from each other and thereby minimize the
transfer of sound waves through the system.
Each panel has an extruded aluminium male profile to one vertical
edge and a female profile to the other.These profiles are fitted
with magnetic membranes which ensure positive interlocking of the
Once the wall panels have been adjusted for height and level the
roller stems are locked with a fail-safe mechanism to ensure that
the panels will align perfectly every time the wall is set up.
Pressure seals extend from the top and bottom of each panel
exerting a closing pressure of 2kn providing panel stability and
excellent acoustic sealing.