AC110- 220V , 50 / 60Hz
0 - 10000RMP
0 - 20ms ; step 0.1ms
0 - 600sec , step 1 sec
Oli pump pressure
0 - 6.5kg / cm2
4.5L / min
Test Tube Capacity
|125 CC||HS code||903180 9090|
-- Ultrasonic cleaning : To perform simultaneous cleaning on
several injectors, to remove the carbon deposits on the injector
-- Uniformity/Sprayability test: To test the uniformity of
injecting amount of each injector, and to monitor the spraying
status of each injector with the lighting of backlight. This test
is also for reverse flush.
-- Leakage test: To test the sealing and dribbling conditions of
injectors under system pressure.
-- Injecting flow test: To check the injecting amount of the
injector in 15 seconds of constant injection.
-- Auto. test: To test injectors by simulating different working
-- On-vehicle cleaning: The unit is equipped with various adaptors
and couplers that facilitate cleaning on the injectors on vehicle.
Full Functions :
01 Ultrasonic cleaning
02 General spray test
03 Idle speed test
04 Medium speed test
05 High speed test
07 Variable speed test
08 Leak detector
09 Fuel level on idle speed
10 Fuel level on medium speed
11 Fuel level on high speed
12 Auto test
13 Fuel on-vechile cleaning
FAQ for this machine :
1. How many injectors can test ?
A : you can test 2 - 8 pcs , this machine have 2 pieses of rail ,
and 2 high fuel hose
2. Do you provide liquid for this machine ?
A : Yes, we can provide this for you. 2 bottles testing and 1
bottle cleaning free for you. if you need more, we also can
provide. 12 bottles in 1 carton
3. Which kind of injectors can test ?
A: This device provide wide pusle, can test almost all kind of
4. Do you have on - car cleaning adaptors ?
A : yes, we have
>> more question, welcome to contact with us. Thank you !
1 . Pulse width widows : Show the injector working pulse width
2 . Pulse width adjustment button : Adjust the injector working
Press up key, increase the injector pulse width while cleaning.
Press down key, reduce the injector pulse width while cleaning.
3 . Start : After the execution of the selected function.
4 . Suspend : Press to pause the selected function.
5 . Timer / REV . Count : How long the injection lasts and How many
times the injection takes place.
6 . Stop: stop the selected function.
7 . Injection time adjustment button:
Press key, increase the injector working time and injection times.
Press key, reduce the injector working time and injection times.
8 . Darin: Drain back liquid to tank.
9 . Function Selector
10 . Function Selection button:
Press up key
Press down key
11 . Main Menu
Factory real pictures: