gm8903 hot wire anemometer

Model Number:GM8903

Place of Origin:CHINA

... for measurement in narrow spaces, and the handle can be elongated for suitable measurement occasions Features Hot Wire Anemometer possesses the following features: 1.Measurement of wind velocity, temperature and flow 2.Unit conversion of wind velocity,

Brand Name:HICORPWELL or OEM

Model Number:HCW668A Hot film wind speed anemometer

Place of Origin:Shenzhen

...a common weather station instrument. "Anemos", meaning wind,and is used to describe any air speed measurement instrument used in meteorology or aerodynamics. Anemometers are widely used in different fields, such as heating, ventilation, air conditioning,

Brand Name:Rongter

Model Number:WD8-2

Place of Origin:Jiangsu,China

... high temperature melting wire for cutting, so that the cutting fracture is straight, flat, high cutting precision, no sundries. This electric hot wire foam cutting machine is a D8 series product of Rongter. Compared with the D6 series widely sold in our

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Hot wire testing machine Introduction: The hot wire test is . The hot wire itself is actually a fixed specification resistance wire ring. During the test, it needs to be heated to the specified temperature by electricity, so that the top of the hot wire contacts the sample for the required time, and then its state can be observed and measured. The testing range depends on the specific test procedure. Scope of application: The hot wire

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ...

Brand Name:Tankii

Model Number:NiCr60/15

Place of Origin:Shanghai, China

..., Electroloy, Nichrome, Alloy C, Nikrothal 6, MWS-675, Stablohm 675,NiCrC. The Tension Factor All metals expand with heat so the nichrome wire at cutting temperature also expands and gets longer. Because of this, some method of keeping tension on the

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:HJ

Model Number:HWI-1

Place of Origin:China

...Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors.

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire...

Brand Name:AI

Model Number:AIC-695220

Place of Origin:China

... introduction The hot wire ignition test chamber is designed according to IEC 60695-2-20 and GB 4943 standards and conforms to the standard hot wire ignition test method. This hot wire ignition test chamber is mainly used for testing the hot wire ignition ...

Brand Name:Lonroy

Model Number:LRX-3

Place of Origin:China

Thermal Conductivity Analyzer (Hot Wire Method) Hot-Wire Thermal Property Tester 1.Description: The LRX-3 thermal conductivity tester employs the transient hot wire method, including the cross-line method and the parallel-line method. It mainly measures...

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview ...

Categories:Pipe Welding

Country/Region:china

... Welding Process - H-TIG ( Hot Wire ) TlG High efficiency, high deposition rate, high quality, 3H hot wire TIG pipe welding process Achieve the dream of TIG welding quality with MIG welding speed Unique high performance hot wire TlG process achieves both ...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60IEC60695-2-20 Hot Wire Coil Ignition Test Apparatus for Solid Electrical Insulating Materials Overview: Hot wire ignition test apparatus conforms to IEC60695-2-20-1995, ASTMD3874-1997, IEC60950-1999, UL746A-2000, UL746C-2000, ...

Brand Name:JINHAIHU

Model Number:ZRS-2

Place of Origin:BEIJING, CHINA

ZRS-2 Hot wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:Guangdong

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ...

Brand Name:HYZONT

Model Number:HZ5040

Place of Origin:China

... Processes: Pulsed TIG, Hot-wire TIG We offers fully automated TIG cladding welding systems for vertical valve-cladding applications. Complete turnkey packages include a wire-feed unit as well as a standard touch-programmable, cold-wire pulsed-TIG